DataProbe iBootBar 8 Outlet remote Power Switch 230V 10A with Modem
|
|
| Product Description for iBB-C10-M |
Get all the power of the iBoot and more with these remote reboot power strips. Control each outlet independently from Web, Telnet, SNMP. Have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. Wherever you are, you are in complete control.
iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
Models are available for North American 15 and 20 amp circuits, as well as international 115/230 VAC, up to 20 amps.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information.
iBootBar continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Know immediately when there is too much load, or a device stops working. Alarms are delivered both by email and SNMP traps.
PHYSICAL: | | Height: | 1U 1.75 in (4.5 cm) | | Width: | 19.0 in (48.25 cm) | | Depth: | 6.00 in (15.25 cm) | | Weight: | 7 lbs (3.25 Kg) |
| Temperature |
| | Operating: | 0 to 40 o C | | Storage: | -10 to 85 o C | | Relative Humidity | 0 to 95% Non-Condensing |
|
|---|
A/C INPUT | | N15 Models | NEMA 5-15 Linecord 115VAC
15 Amps combined total switched per Linecord
Supplied with NEMA 5-15 Linecord, attached | | N20 Models | NEMA 5-20 Linecord 115VAC
20 Amps combined total switched per Linecord
Supplied with NEMA 5-20 Linecord, attached | | C10 Models | IEC320 C14 Receptacle 100-240VAC
10 Amps total at 240VAC Max per Linecord
Supplied with IEC320 C13 to CEE7 (SHUCO) Linecord | | C20 Models | IEC320 C20 Receptacle 100-240VAC
20 Amps total at 240VAC Max per Linecord |
|
|---|
NETWORK | 10/100 Ethernet
Web, Telnet, SNMP, SMTP
Port Assignable for Web and Telnet.
SSL on Web control |
|---|
SERIAL PORT | D9 Serial, configured as DCE. to 115.2Kbps |
|---|
| INTERNAL MODEM OPTION | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
|---|
SWITCHED OUTLETS | | N15 Models | 8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 15 Amps Max Total per Linecord | | N20 Models | 8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 20 Amps Max Total per Linecord | | C10 Models | 8 x IEC 320-C13
10 Amps Max per Receptical, 10 Amps Max Total per Linecord | | C20 Models | 8 x IEC320-C13
10 Amps Max per Receptical, 20 Amps Max Total per Linecord |
|
|---|
COMPLIANCE | UL / cUL Listed
CE Marked
RoHS / WEEE Compliant
FCC Part 15 Class B |  |
|
|---|
Access from any Network point or any Telephone | No field trips required for Reboot. Save time and money by eliminating service calls and reducing downtime to a minimum. |
|---|
Multiple Control Options | | Web | Intuitive Browser Interface | | Telnet | Complete setup and control access | | SNMP | Easy integration into network management systems | | Serial | Out-of-band access | | Internal Modem | Menu and DTMF dial tones |
|
|---|
Multi-User | Assign permissions to each user for outlets and configuration. Users see only outlets assigned |
|---|
IP Addressed, 10/100Base-T | Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access. |
|---|
Automatic Reboot Operation | Auto-Ping Automatic Operation for crashed devices. Auto-Ping pings device and takes action when no response. Complete control over frequency and timers. |
|---|
Current Sensing and Alarms | Know when critical power conditions occur and take immediate action. Email and SNMP Trap notification. |
|---|
North American and
International Versions | 115 VAC with N. American cords and plugs.
100-240VAC with IEC connections |
|---|
Dual and Single Power Inlet | Supports dual redundant powered devices with a single click. |
|---|
Group and Stagger | Combine any outlets into logical groups and power up devices in sequence to reduce power surges. |
|---|
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP. | |
|---|
|
|
|
 Package Content
|
- 1 - DataProbe iBootBar Single IEC320 10 Amp Linecord, 8 IEC320 Outlets Plus Modem
- 1 - User Guide
|
 Frequently Asked Questions
|
Cannot find the answer to your questions? have a question of your own? Think there
is a question we need to add? Ask
us any thing
|
|