• Configure and control the switch through Ethernet, serial port or front panel buttons.
  • Control switching via optional Infrared remote control.
• Equipped with Liquid Crystal Display (LCD) for front panel operation.
• Switch VGA video directly.
• Each output provides one video signal.
• Each input can be independently connected to any or all outputs.
• Video bandwidth is 200 MHz or greater.
• Supports 1920x1200 video resolution at a refresh rate of 85 Hz.

• Classrooms.
• Boardrooms.
• Trade shows.
• Conference and entertainment facilities.
• Courtrooms.
• Command centers.
• Control rooms.

Video Input

• Sixteen female 15-pin HD connectors.
• Impedance: 75 Ohms.

Video Output

• Eight female 15-pin HD connectors.
• 1920x1200 video resolution with no degradation.
• Impedance: 75 Ohms.
• Bandwidth: 200 Mhz, fully loaded.

Power

• 110 or 220 VAC at 50 or 60 Hz.
• Power consumption: 15W

MTBF

• 63,330 hrs

Cables

• Interface cables between the computers and the switch are required for proper operation.
• Recommended NTI video cables:
  • VGA interface cable (VEXT-xx-MM).
  • VGA to BNC cable (VINT).
• Cables not included.

Environmental

• Operating temperature: 32°F to 100°F (0°C to 38°C).
• Storage temperature: -20°F to 140°F (-30°C to 60°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals

Warranty

• Two years

• NTI Matrix VGA Video Switch 16 Inputs 8 Outputs
• User Manual
• Registration Card
• Power Supply
• Matrix Control Software

• SVGA Cables to connect VGA inputs (from computers) to the switch