• Compatible with PCs, SUNs and MACs with VGA video.
• Eliminate redundant monitors.
• Ideal for classrooms and boardrooms.
• Interconnect NTI switches & splitters for complex applications.
• Available with audio and/or RS232 control options.
• 3.5mm stereo audio jacks for inputs and output.
• Maximum input/output levels: 4Vp-p (line level).
• Input impedance: 10k Ohms.
• Output impedance: 32 Ohms.
• Signal-to-Noise Ration (SNR): 87 dBA
• Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
• Total Harmonic Distortion + Noise: 0.02% at 1kHz.
• Requires powered speakers or headphones.
• CD quality audio output.

Monitor

• Crisp & clear 1900x1200 resolution.
• Female 15-pin HD connectors.
• Bandwidth is 150 MHz.

Control

• Touch buttons on front with LED indication of port selection.
• These optional control methods are available:

Power

• 110 or 220 VAC at 50 or 60 Hz.
• Power consumption:
  • 4-port and 8-port: 5W
  • 16-port: 10W

MTBF

• SE-15V-4-L: 82,069 hrs
• SE-15V-4-RS: 80,252 hrs
• SE-15V-8-L: 74,482 hrs
• SE-15V-8-RS: 73,866 hrs
• SE-15V-16-L: 70,578 hrs
• SE-15V-16-RS: 71,599 hrs

Dimensions

• SE-15V-4-L/RS and SE-15V-8-L/RS WxDxH (in):
  • 10.9x6x1.75 (without supplied rackmount kit)
  • 19x6x1.75 (with supplied rackmount kit)
• SE-AV-4-L/RS and SE-AV-8-L/RS WxDxH (in):
  • 15.3x6x1.75 (without supplied rackmount kit)
  • 19x6x1.75 (with supplied rackmount kit)
• SE-15V-16-L/RS WxDxH (in): 10.9x6x3.5
• SE-AV-16-L/RS WxDxH (in): 15.3x6x3.5

Environmental

• Operating temperature: 32°F to 100°F
  (0°C to 38°C)
• Storage temperature: -22°F to 140°F
  (-30°C to 60°C)
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals

• CE, FCC, RoHS

Control

• Female DB9 connector.
• Baud rate 300 through 9600.
• Address up to 15 units, all of which can be daisy-chained and controlled by one serial port.
• Add "-RS" to the part number to specify this option. (Available for switches with 4 or more ports.)
• Local control is not available when "-RS" is specified.

Commands

• RS - causes switch to reset so that IN1 connects to OUT1, IN2 connects to OUT2.
• CS - causes one INx/OUTx connection to occur.
• CA - causes all inputs to connect to specified output.
• RO - reads what input is connected to specified output.
• RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.

Warranty

• Two years.

• NTI VidMux Rackmount 16 Port VGA Audio Video Switch RS232 Control
• Warranty Card
• User Manual