Monitor-VGA

• Bandwidth is 150MHz.
• Supports 1900x1200 resolution with no degradation.
• All connectors are female 15 pin high density VGA.

Mouse

• All connectors are female.
• Connector is 6 pin miniDIN.
• Compatible with all standard 2-button PS/2 mice as well as the following:
  • Alps Glidepoint Touchpad-extended functions (i.e. tapping, etc.) are not supported.
  • Cirque Glidepoint Touchpad.
  • IBM Scroll Point mouse-extended stick functions are not supported.
  • Kensington Orbit Trackball.
  • Logitech (and other) 3-button mice.
  • Logitech 2-button Wheel Mouse.
  • Microsoft Ballpoint mouse.
  • Microsoft IntelliMouse.

Regulatory Approvals

• RoHS

Keyboard

• All connectors are female.
• Connector is 6 pin miniDIN.
• Keyboard and mouse presence are emulated 100% of the time so all computers boot error-free.
• Keyboard and mouse are hot-pluggable.
• PC switch will hard or soft boot all PCs 100% of the time.
• SCROLL-, CAPS- & NUM- LOCK lights update upon switching.

Power

• 110 or 220 VAC at 50 or 60 Hz via AC adapter.
• Two-port switches draw power from attached computers.

Environmental

• Operating temperature: 32°F to 100°F (0°C to 38°C).
• Storage temperature: -20°F to 140°F (-30°C to 60°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Warranty

• 2 years

Buttons on Front

• Touch a button and be connected to a CPU or change modes of operation.
• LEDs indicate currently selected port and mode of operation.
• Hold in any button for more than two seconds to go into Scan Mode, Broadcast Mode or Command Mode.
  • Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
  • Scan Mode feature causes the switch to automatically and sequentially display the video from each powered on computer for 2-255 seconds.
  • Broadcast Mode feature allows the user's keystrokes to be sent to all powered on computers.
  • Command Mode allows the user to give instructions to the switch through their keyboard. Keystrokes are not passed to the computer.

Keyboard

• Type <CONTROL> + <`> to go into Command Mode. ("`" is the accent mark located on the same key as the tilde "~")
• Press ESCAPE to leave Command Mode and return to Normal Mode
• Scan Mode, Broadcast Mode or Command Modes are available from the keyboard.