XSDRSN-02 | Lantronix XPress DR Device Server

Connect enterprise (ERP,MES) systems to factory floor devices without disturbing existing control networks
Allow remote firmware upgrades, saving money and time from manual upgrades
IAP version supplies many industrial communication protocols
Configurable serial interface supports RS-232, RS-422, or RS-485
10Base-T/100Base-TX Ethernet (RJ45)
Isolated serial and Ethernet ports
FM-approved for hazardous locations Class I, Div. 2
RoHS Compliant

Remotely configure, program, monitor, and manage: PLCs, Drives, Process Controls, Power Monitoring Equipment, Barcode Scanners, and other factory floor serial devices.

The XPress-DR and XPress-DR-IAP Device Servers allow virtually any serial device to be connected to a new or existing Ethernet network.

By encapsulating serial data and transporting it over Ethernet, the XPress-DR/DR-IAP allows virtual serial links to be established over Ethernet. By using these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility, or across the global enterprise.

When used in conjunction with an OPC server, most Windowsr based HMI, SCADA, and PC-based control applications have full access to information in the connected device. Existing COM-port based Windowsr applications can access network-enabled devices using our Com Port Redirector software. Redirector software allows the creation of virtual serial ports, which can be mapped to the remote device servers over Ethernet and connected to the XPress-DR and XPress-DR-IAP.

The XPress-DR-IAP installable communication drivers allow specific support for various industrial communication protocols. With native support for these protocols, devices that previously allowed only one connection can now support multiple connections simultaneously.

Flexible configuration options allow the unit to be set up locally using the serial port, or remotely over Ethernet using Telnet or a common web browser. Included Windowsr based configuration software simplifies the process of installing communication drivers and configuring them for use with attached devices. Flash memory provides for maintenance-free, non-volatile storage, and allows future system upgrades.

Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet isolation, a wide 0° to 60°C operating range, and a 9-30VDC/9-24VAC power input, the XPress-DR and XPress-DR-IAP are ideal for any industrial application.

SPECIFICATIONS:

Serial Interface
Interface	RS-232, RS-422, or RS-485
Connector	Screw terminals or RJ45
Data Rates	300 to 115,200 bps
Characters	7 or 8 data bits
Parity	odd, even, none
Stop Bits	1 or 2
Flow Control
Software	XON/XOFF
Hardware	RTS/CTS
Installable Serial Protocols (XPress-DR-IAP only)
Network Interface
Standards	ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP, DHCP, TFTP, Telnet, and HTTP
Interface	10Base-T/100Base-TX Ethernet
Connector	RJ45
Installable application layer protocols (XPress-DR-IAP only)
Indicators
Ready, Fault/Configuration, Activity, Link, Serial Transmit Data, Serial Receive Data
Management
SNMP, serial, Telnet, and HTTP (web browser)
Isolation
Ethernet	1500 Vrms
Serial	2000 Vrms
Power
Input	9 to 30VDC/9-24VAC, 3W maximum
Connector	Screw terminals for power and ground
Environmental (Operating)
Temperature	0° to 60°C (32° to 140°F)
Humidity	20% to 90% RH, non-condensing
Packaging
Mounting	DIN-rail (35 mm)
Material	High-impact plastic
Dimensions (LxWxH)	6.09 x 3.55 x 8.8 cm (2.4 x 1.4 x 3.5 in)
Agency Approvals
UL, CSA,TUV, FCC, CE, FM Class I, Div. 2
Software
Included Windowsr 95/98/ME/NT/2000-based configuration software simplifies initial setup
Shipping
Dimensions (LxWxH)	18.7 x 22.9 x 11.1 cm (7.375 x 9.0 x 4.375 in)