Gefen DVI FM1000 Fiber Video Extender Pair Kit 30ft

Gefen DVI FM1000 Fiber Video Extender Pair Kit 30ft
Gefen DVI FM1000 Fiber Video Extender Pair Kit 30ft
Gefen DVI FM1000 Fiber Video Extender Pair Kit 30ft
Gefen DVI FM1000 Fiber Video Extender Pair Kit 30ft
This product has been phased out, please call us for an alternative
  • Note: This is a complete kit that include Gefen DVI FM1000 Fiber DVI Extension Pair along with a 30ft Fiber Optic Cable. Everything you need to extend a dvi signal 30ft over fiber cables. Specifications below apply to Gefen DVI FM1000 Fiber Optic DVI Extender in general.
  • Extends any DVI (Digital Visual Interface)-compliant device up to 3,280 ft (1km) from the computer
  • Supports video resolutions up to 1080p, 2K, and 1920 x 1200
  • Uses inexpensive and widely available single-strand multimode SC fiber optic cable
  • Automatic EDID Programming feature enables quick and correct sync of source to display
  • Immunity from electromagnetic influences (EMI), thanks to all-fiber construction.
  • Saves space on your desktop and Increases Productivity
  • Eliminates computer noise where you work
  • Supports DDWG standard for DVI compliant monitors
  • Video Amplifier Bandwidth: 165 MHz (Single Link)
  • Input Video Signal: 1.2 volts p-p
  • Input DDC Signal: 5 volts p-p (TTL)
  • DVI Connector: Type DVI-D (19 pin) male
  • Link Connector: SC
  • Power Supply: 5V DC
  • Power Consumption: 2.5 Watts (max.) per power supply unit
  • Dimensions: 2.6" D x 0.6" H x 1.6"W per transceiver
  • Shipping Weight: 1 lbs.
Extend DVI over One Strand of Fiber Cable -- up to 3,280 feet (1km) away

The DVI FM1000 Extender extends your DVI display up to 3,280 feet (1km) away from your video source, with only two tiny transceivers required, using a 100% optical SC fiber solution with a single strand of fiber optic cable.

Automatic EDID Programming enables quick and correct synchronization of the video source to the display without any manual configuration needed. It's a great way to extend DVI video easily and unobtrusively.

How it works
The DVI FM1000 Sender unit plugs into a DVI port (either a computer source or another device transmitting a DVI signal). The DVI FM1000 Receiver unit plugs into a DVI display. A single strand of multimode SC fiber optic cable connects the sender to the receiver. Power is connected to the FM 1000 receiver using the 5V wall adapter and crisp, vibrant DVI video appears on the DVI display.

Optical signal transmission provides immunity from electromagnetic interference (EMI).
What's included:
  • One DVI FM1000 Sender Unit
  • One DVI FM1000 Receiver Unit
  • One 5Vdc Power Supply
  • 30ft single strand SC SC Fiber Optic Cable.
PO Box 669875
Marietta, GA 30066

Toll Free: 1 (800) 586 7948
International: 1 (678) 403 4500
Fax: 1 (770) 509 4973

  |     |  

Site Security
Copyright © 1998 - 2015 All rights reserved. Logos, trademarks are property of their respective owners. terms of use