• A single LCD console drawer with built-in KVM switch controls up to 8 USB or PS2 computers directly
• 8-port KVM switch, keyboard, touch pad, all in a 1-U high and 19"rack-mountable unit
• Dual consoles design - remote access ready 
• Auto-sensing of station position on daisy chained installations - no need for manual DIP switch setting
• Cascade up to 64 CS9138 KVM units and control up to 512 computers from a single console
• No software required
• Convenient computer selection via Pushbutton, Hotkey and OSD
• AutoScan feature for monitoring selected computers
• Hot pluggable - add or remove computers without having to power down the switch
• Two level password protection - up to four authorized users and an administrator view and control the computers - separate profiles for each
• Two level logout - manual and timed
• Firmware upgrade through flash ROM
• PS/2 keyboard and mouse emulation - computers boot even when the console focus is elsewhere
• 15" RGB analog LCD display supporting high XGA resolutions of up to 1024 x 768 with 250cdKit Depth/m(sq) brightness

The CL1758 offers a space-saving, streamlined approach to KVM switch technology by integrating a keyboard, LCD monitor, and touchpad in a 1U SlideawayT housing. The LCD display is built into the cover; the keyboard and touchpad are built into the base. Setup is fast and easy; simply plug cables into their appropriate ports. There is no software to configure, no installation routines, and no incompatibility problem. Slide the KVM module section out; flip the cover up; and you are ready to go to work. When finished, flip the cover down and slide the KVM module away.

For further convenience and flexibility, the switch also supports an external keyboard, monitor, and mouse console that allow the second user access remotely or locally. Work with ATEN's IP access unit (CN5000), you can control attached computers anywhere around the world.

There is no better way to save time and money than with a CL1758 installation. By using the CL1758 to manage your installation, you: (1) eliminate the expense of having to purchase a separate keyboard, monitor, and mouse for each computer; (2) save all the space those extra components would take up; (3) save the space that a keyboard, monitor, and mouse would take with a standard KVM switch; (4) save on energy costs; and (5) eliminate the inconvenience and wasted effort involved in constantly moving from one computer to another.

The following equipment must be installed on each computer:

• VGA, SVGA or Multisync card; (Note: Since the integrated LCD monitor's maximum resolution is 1024 x 768, make sure that the computer resolution settings do not exceed 1024 x 768.)
• 6-pin mini-DIN (PS/2 style) mouse port; a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 

For SUN servers: Servers with VGA and PS/2 connections (such as the SUN Cobalt)are supported; the legacy 13W3 SUN servers require additional adapters. The Spac SUN workstation with USB connection is supported with an additional adapter.

Cables: For optimum signal integrity and to simplify the layout, we strongly recommend that you use the following high quality ATEN Custom Cables:

ATEN KVM to computers:

For PS/2

• 2L5202P - 6'
• 2L5203P - 10'
• 2L5206P - 20'

For USB

• 2L5202U - 6'
• 2L5203U - 10'
• 2L5205U - 15'

• 1 - KVM Switch with Standard Rack Mounting Kit
• 2 - KVM Cable
• 1 - Firmware Upgrade Cable
• 1 - Power Cord
• 1 - User Manual
• 1 - Quick Start Guide