NTI Veemux CAT5 Matrix Audio Video Switch 32 Input 8 Output
|
|
| Product Description for SM-32X8-C5AV-LCD |
Configure and control the switch though Ethernet, serial port or front panel buttons. Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface. Equipped with Liquid Crystal Display (LCD) for front panel operation. A digital VU-meter shows the audio levels of the selected output. Each output provides one video signal and one stereo audio signal. Each input can be independently connected to any or all outputs with no image degradation. No loss of audio or video quality between the local and remote units. 1RU or 2RU rackmount case is standard. VGA, S-Video, and HDTV transmitters and receivers can be supported on the same VEEMUX unit. VGA inputs only work with VGA outputs, S-Video inputs only work with S-Video outputs, and HDTV inputs only work with HDTV outputs.
The VEEMUX Audio/Video Matrix Switch routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet between the local and remote units.
A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connect to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.
VEEMUX SM-32X8-C5AV-LCD - Female RJ45 input/output connectors.
- Analog bandwidth is 175 MHz.
- 10/100BaseT ethernet interface.
- Supported protocols: HTTP. HTTPS, Telnet
- RS232 interface
Power- 110 or 220 VAC at 50 or 60 Hz via IEC connector.
- Power consumption: 35W
- Add -48V5V10A2, optional internal DC-DC converter, to install the SM-32x8-C5AV-LCD in a Telecom environment.
MTBF
Cables- CAT5, CAT5e or CAT6 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
Environmental- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Storage temperature: -20°F to 140°F (-30°C to 60°C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalsWarrantyLocal Unit (Transmitter) Video- VGA transmitter:
- Male 15-pin HD connector for input connection.
- Female 15-pin HD connector for local monitor.
- Compatible with SVGA, XGA, and VGA.
- S-Video transmitter:
- Male 4-pin miniDIN connector for input connection.
- Female 4-pin miniDIN connector for local monitor.
- Compatible with S-Video.
- HDTV transmitter:
- Three RCA plugs for input connection.
- Three RCA jacks for local monitor.
- Compatible with YPbPr component video.
- Input impedance: 75 Ohms.
- Maximum input level: 1.45Vp-p.
- Supports Separate and Composite TTL level sync.
- Input Sync frequency ranges:
- Horizontal: 15 kHz to 130 kHz.
- Vertical: 30 kHz to 150 Hz.
- Video is DC coupled.
Audio- VGA video + audio receiver: 3.5mm stereo audio RCA plugs for input connection and 3.5mm stereo audio jack for local speakers.
- S-Video + audio receiver: two RCA plugs for input connection and 3.5mm stereo audio jack for local speakers.
- HDTV + stereo audio receiver: two RCA plugs for input connection and two RCA jacks for local speakers.
- Input impedance: 10k Ohms.
- Maximum input levels: 3.1Vp-p (line level).
- CD quality audio output.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 10W
- Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the local unit in a Telecom environment.
Remote Unit (Receiver) Video- VGA receiver:
- Female 15-pin HD connector.
- Supports resolutions up to 1920x1440.
- S-Video receiver:
- Female 4-pin miniDIN connector.
- Supports maximum 800x600 S-Video resolution.
- HDTV receiver:
- Three RCA jacks.
- Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
- Video quality adjustment for different lengths of CAT5/5e/6 cable is done manually for video-only units and automatically for audio/video units.
- When using CAT6, some degradation may be experienced depending on the length of the cable.
- Output impedance: 75 Ohms.
- Maximum output level: 1.45Vp-p.
Audio- GA video + audio receiver: 3.5mm stereo audio jack.
- S-Video + audio receiver: 3.5mm stereo audio jack.
- HDTV + stereo audio receiver: two RCA jacks.
- Frequency response: 20 Hz to 20 kHz, +/-1dB.
- Signal-to-Noise Ratio (SNR): 76 dBA.
- Total Harmonic Distortion and Noise (THD+N): 0.017%.
- Stereo crosstalk: -70 dB.
- Maximum output levels: 3.1Vp-p (line level).
- Line level output: supports multimedia speakers.
- Require powered speakers.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 10W
- Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the remote unit in a Telecom environment.
Environmental- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Storage temperature: -20°F to 140°F (-30°C to 60°C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalsFront Panel Interface- Liquid Crystal Display (LCD) can display all current connections.
- Locally change input and output selections with front panel buttons.
- Digital VU-Meter displays audio levels for the currently selected port.
- Configuration and control can be done using the front panel buttons.
- Main menu allows the user to:
- Set serial address.
- Set serial speed.
- Set IP address.
- Set Subnet Mask.
- Adjust contrast.
- Force compensation.
- Show size.
RS232 Control- Configuration and control can be done through the serial port.
- Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
- Selectable baud rate: 1200 through 9600.
- Baud rate is set via the main menu, serial command, telnet or web page.
Commands- CS-causes one INx/OUTx connection to occur.
- CA-causes all inputs to connect to specified output.
- RO-reads what input is connected to specified output.
- CC-save matrix.
- RC-recall matrix.
- CB-change baud rate.
- RV-version information.
- RU-reads size of matrix, reports number of inputs and number of outputs on specified switch.
- EA-set the IP address.
- EM-set the IP mask.
- EG-set the default gateway.
- ET-set the webserver timeout.
Ethernet Control- Configuration can be done over the Internet via web page or telnet.
Security is ensured by password and user configurable timeout. - Up to 25 users can access the web page at one time.
- The user can access the following pages:
- Switch page: allows the user to connect any input to any output, save and recall up to ten connections.
- Administration pages: administrator can access setup pages, port setting page and update firmware page. Assign names to video and audio inputs and outputs.
- Password page: allows the user to change the password for accessing the web interface.
- Help page: documentation on the usage of the web interface.
- Update Web Server page: globally update the web server to any settings that have been changed.
- Logout page: view currently active connections and logout of the web interface.
Telnet- Security is ensured by password.
- Commands are similar to RS232 commands.
- The telnet server listens on ports 2000 and 2005.
- Port 2000 is for an operator telnet session.
- Port 2005 is intended for a software control type session.
|
|
|
 Package Content
|
- NTI Veemux CAT5 Matrix Audio Video Switch 32 Input 8 Output
- Software CD
- User Manual
- Power Cord
- Warranty Registration Card
|
 Frequently Asked Questions
|
Cannot find the answer to your questions? have a question of your own? Think there
is a question we need to add? Ask
us any thing
|
|