• For use with NTI's VGA Splitter

Touch Screen

• 2-4 Male 9 pin D serial connectors to the touch screen.
• 1 Female 9 pin D serial connector to the HOST computer.

Power

• 110 or 220 VAC at 50 or 60 Hz.

Environmental

• Operating temperature: 32°F to 100°F (0°C to 38°C)
• Storage temperature: -20°F to 140°F (-30°C to 60°C)
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH

Warranty

• Two years

• USERx mode, only one user has control over the computer, until the user setting is manually changed.
• INST mode, all users of touch screens connected to the switch have simultaneous control over the computer.
• Each user has equal control, no users are locked out.
• DELAY mode, the first touch screen to be made active by a user gets control while other touch screens are locked out until activity stops for a programmable delay time period.
• LED's on the front panel will illuminate to indicate mode of operation, DELAY mode program status, and/or which touch screen has control.
• A red BUSY LED located on the front of the Vopex indicates when one of the screens is in use while in DELAY and INST modes.

• NTI VOPEX 2 Port Touch Screen Sharer
• User Manual
• Warranty Card