NTI KEEMUX 2 Port KVM Switch
|
|
| Product Description for KEEMUX-P2 |
- Control all network computers from one office.
- Auto scan all computers to catch system failures early.
- Improve manageability of your computer room - eliminate extra cables, monitors, keyboards and mice.
KEEMUXr PS/2 KVM switches allow one keyboard, monitor and mouse to control multiple PCs (up to 128 computers). Dedicated internal microprocessors emulate keyboard and mouse presence to each attached PC 100% of the time so all computers boot error free.
Compatible with IntelliMouser. Compatible with SUN FireT V20z. Compatible with all PS/2-style PCs and laptops, HP9000, Silicon Graphics and IBM RS6000 workstations. Broadcast keystrokes to all computers for simultaneous shut-downs. Cascade smaller KVM switches together as your network grows-up to 128 ports. Available with RS232 Control option.
Monitor-VGA- Bandwidth is 150MHz.
- Supports 1900x1200 resolution with no degradation.
- All connectors are female 15 pin high density VGA.
Mouse- All connectors are female.
- Connector is 6 pin miniDIN.
- Compatible with all standard 2-button PS/2 mice as well as the following:
- Alps Glidepoint Touchpad-extended functions (i.e. tapping, etc.) are not supported.
- Cirque Glidepoint Touchpad.
- IBM Scroll Point mouse-extended stick functions are not supported.
- Kensington Orbit Trackball.
- Logitech (and other) 3-button mice.
- Logitech 2-button Wheel Mouse.
- Microsoft Ballpoint mouse.
- Microsoft IntelliMouse.
Regulatory ApprovalsKeyboard- All connectors are female.
- Connector is 6 pin miniDIN.
- Keyboard and mouse presence are emulated 100% of the time so all computers boot error-free.
- Keyboard and mouse are hot-pluggable.
- PC switch will hard or soft boot all PCs 100% of the time.
- SCROLL-, CAPS- & NUM- LOCK lights update upon switching.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Two-port switches draw power from attached computers.
Environmental- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Storage temperature: -20°F to 140°F (-30°C to 60°C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
WarrantyButtons on Front- Touch a button and be connected to a CPU or change modes of operation.
- LEDs indicate currently selected port and mode of operation.
- Hold in any button for more than two seconds to go into Scan Mode, Broadcast Mode or Command Mode.
- Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode feature causes the switch to automatically and sequentially display the video from each powered on computer for 2-255 seconds.
- Broadcast Mode feature allows the user's keystrokes to be sent to all powered on computers.
- Command Mode allows the user to give instructions to the switch through their keyboard. Keystrokes are not passed to the computer.
Keyboard- Type <CONTROL> + <`> to go into Command Mode. ("`" is the accent mark located on the same key as the tilde "~")
- Press ESCAPE to leave Command Mode and return to Normal Mode
- Scan Mode, Broadcast Mode or Command Modes are available from the keyboard.
|
|
|
 Package Content
|
- NTI 2 Port KVM Switch
- User Manual
- Warranty Registration Card
|
 Frequently Asked Questions
|
Cannot find the answer to your questions? have a question of your own? Think there
is a question we need to add? Ask
us any thing
|
|