NTI Unimux 4 Port USB DVI KVM Switch with RS232 Control
|
|
| Product Description for UNIMUX-DVI-4RS |
Incorporates NTI's patented true autoboot USB switching - all attached USB PCs, SUNs and MACs can be booted simultaneously. Up to 1900x1200 video resolution. Supports DVI interface for crisp and clear video quality on Flat Panel Display. Uses single link HDMI connectors. Fully compliant with USB (1.0, 1.1) standards.USB SUN start-up keys are supported. Supports MAC soft (keyboard) power-on. SUN extra keys are emulated on USB keyboards with Windows keyboard layouts. Front-panel push button for channel selection. LED indicators on switch show which port is active. Fits into 1 RU with supplied rackmount kit. Available with optional RS232 Control.
The UNIMUX USB DVI KVM switch allows you to control up to 16 single link DVI enabled computers with one DVI monitor, USB keyboard and USB mouse.
Host connections- Female HDMI-A connectors.
- Female USB Type B connectors.
- DVI enabled PC, MAC and SUN computers.
- PCs with USB-enabled OS (Win 98/ME/2000/XP/Vista) and USB ports.
- PCs with USB-enabled BIOS (legacy USB support) and USB ports.
Monitor- Supports crisp and clear video resolution up to 1900x1200.
- Female HDMI-A connector.
Mouse- Female USB Type A connector.
- Compatible with most USB mice, including USB IntelliMouser.
- Mouse is hot-pluggable.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter (supplied).
- Power consumption: 5W
Keyboard- Female USB Type A connector.
- Compatible with most USB keyboards.
- Keyboard is hot-pluggable.
- Supports SUN and MAC extra keys.
Cables- Interface cables between your computers and the switch are required for proper operation. Use DVI-HDMI-xx-MM and USB-AB-xM to connect computers to the switch.
Environmental- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Storage temperature: -20°F to 140°F (-30°C to 60°C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalWarrantyFront Panel Interface- LEDs indicate currently selected port and mode of operation.
- Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode.
- In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode automatically and sequentially displays the video from each powered on computer for 2-255 seconds.
- Broadcast Mode allows the user's keystrokes to be sent to both powered on computers. (Broadcast Mode is not available for MACs.)
- Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer.
Keyboard- Scan or Command Modes are available from the keyboard using hot keys.
- Use the keyboard to command the switch box to select ports or configure the Scan delay.
- Type <Ctrl>+<`> (or <Compose>+<`>) to go into Command Mode.
- Press <Esc> to leave Command Mode and return to Normal or Scan Mode.
Control- RJ45 connector.
- Baud rate 2400, 9600, 19200, or 38400.
- Use DIP switches to address up to 15 units, all of which can be daisy-chained and controlled by one serial port.
- Download RS232 protocol manual
Commands- RS - causes switch to reset so that IN1 connects to OUT1.
- CS - causes one INx/OUTx connection to occur.
- RO - reads what input is connected to specified output.
- RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.
|
|
|
 Package Content
|
- NTI Unimux 4 Port USB DVI KVM Switch with RS232 Control
- Power Supply
- Warranty Manual
- User Manual
|
 Frequently Asked Questions
|
Cannot find the answer to your questions? have a question of your own? Think there
is a question we need to add? Ask
us any thing
|
|