DataProbe iBB-2N20 iBootBar 8 Port 20AMP Dual Remote Power Switch

DataProbe iBB-2N20 iBootBar 8 Port 20AMP Dual Remote Power Switch
$545.00         Add to Cart
Item #:
Mfg #:
In Stock
Usually ships same day
Free Ground Shipping
No Sales Tax (Except in GA)
Order the DataProbe iBootBar 8 Port 20AMP Dual Remote Power Switch
Get all the power of the iBoot and more with these remote reboot power strips. Control each outlet independently from Web, Telnet, SNMP. Have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. Wherever you are, you are in complete control.

iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.

Models are available for North American 15 and 20 amp circuits, as well as international 115/230 VAC, up to 20 amps.

The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information.

iBootBar continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Know immediately when there is too much load, or a device stops working. Alarms are delivered both by email and SNMP traps.

Height:1U 1.75 in (4.5 cm)
Width:19.0 in (48.25 cm)
Depth:6.00 in (15.25 cm)
Weight:7 lbs (3.25 Kg)
Operating:0 to 40 o C
Storage:-10 to 85 o C
Relative Humidity0 to 95% Non-Condensing
N15 ModelsNEMA 5-15 Linecord 115VAC
15 Amps combined total switched per Linecord
Supplied with NEMA 5-15 Linecord, attached
N20 ModelsNEMA 5-20 Linecord 115VAC
20 Amps combined total switched per Linecord
Supplied with NEMA 5-20 Linecord, attached
C10 ModelsIEC320 C14 Receptacle 100-240VAC
10 Amps total at 240VAC Max per Linecord
Supplied with IEC320 C13 to CEE7 (SHUCO) Linecord
C20 ModelsIEC320 C20 Receptacle 100-240VAC
20 Amps total at 240VAC Max per Linecord
10/100 Ethernet
Web, Telnet, SNMP, SMTP
Port Assignable for Web and Telnet.
SSL on Web control
D9 Serial, configured as DCE. to 115.2Kbps
INTERNAL MODEM OPTION 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control
N15 Models8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 15 Amps Max Total per Linecord
N20 Models8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 20 Amps Max Total per Linecord
C10 Models8 x IEC 320-C13
10 Amps Max per Receptical, 10 Amps Max Total per Linecord
C20 Models8 x IEC320-C13
10 Amps Max per Receptical, 20 Amps Max Total per Linecord
UL / cUL Listed
CE Marked
RoHS / WEEE Compliant
FCC Part 15 Class B

Access from any Network point or any Telephone
No field trips required for Reboot. Save time and money by eliminating service calls and reducing downtime to a minimum.
Multiple Control Options
WebIntuitive Browser Interface
TelnetComplete setup and control access
SNMPEasy integration into network management systems
SerialOut-of-band access
Internal ModemMenu and DTMF dial tones
Assign permissions to each user for outlets and configuration. Users see only outlets assigned
IP Addressed, 10/100Base-T
Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Automatic Reboot Operation
Auto-Ping Automatic Operation for crashed devices. Auto-Ping pings device and takes action when no response. Complete control over frequency and timers.
Current Sensing and Alarms
Know when critical power conditions occur and take immediate action. Email and SNMP Trap notification.
North American and
International Versions
115 VAC with N. American cords and plugs.
100-240VAC with IEC connections
Dual and Single Power Inlet
Supports dual redundant powered devices with a single click.
Group and Stagger
Combine any outlets into logical groups and power up devices in sequence to reduce power surges.

The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface.

Multiple users, each with administrator assigned rights only see the outlets they are responsible for.

Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies.

In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.

Web Browser  Screenshot shows iP-810 web control.  Also control with  telnet. Reboot or power cycle any device from any network location, even the kiosk at the airport.
What's included:
  • 1 - DataProbe iBootBar 8 Port 20AMP Dual Remote Power Switch
  • 1 - Warranty Card
  • 1 - User Manual

Not included
  • Ethernet network Cord
  • Power Cords to connect computers to the switch
Live ChatOrder StatusShopping CartSearch
Search .....

1 (800) 586 7948
Free Shipping: on all orders over $50
Copyright © 1998 - 2015 All rights reserved. Logos, trademarks are property of their respective owners. terms of use